Специализация An Introduction to Programming the Internet of Things (IOT)
Create Your Own Internet of Things (IoT) Device. Design and create a simple IoT device in just six courses.
Об этой специализации
Следуйте предложенному порядку или выберите свой.
Поможет на практике применить полученные навыки.
Отметьте новые навыки в резюме и на LinkedIn.
- Beginner Specialization.
- No prior experience required.
Introduction to the Internet of Things and Embedded SystemsТекущая сессия: Mar 27–May 1.
- 4 weeks, 1-3 hours/week
О курсеThe explosive growth of the “Internet of Things” is changing our world and the rapid drop in price for typical IoT components is allowing people to innovate new designs and products at home. In this first class in the specialization you will learn the importance of IoT in society, the current components of typical IoT devices and trends for the future. IoT design considerations, constraints and interfacing between the physical world and your device will also be covered. You will also learn how to make design trade-offs between hardware and software. We'll also cover key components of networking to ensure that students understand how to connect their device to the Internet. Please note that this course does not include discussion forums.
The Arduino Platform and C ProgrammingТекущая сессия: Mar 27–May 1.
О курсеThe Arduino is an open-source computer hardware/software platform for building digital devices and interactive objects that can sense and control the physical world around them. In this class you will learn how the Arduino platform works in terms of the physical board and libraries and the IDE (integrated development environment). You will also learn about shields, which are smaller boards that plug into the main Arduino board to perform other functions such as sensing light, heat, GPS tracking, or providing a user interface display. The course will also cover programming the Arduino using C code and accessing the pins on the board via the software to control external devices. Please note that this course does not include discussion forums.
Interfacing with the ArduinoТекущая сессия: Mar 27–May 1.
- 4 weeks of study, 2-3 hours/week
О курсеArduino senses the environment by receiving inputs from add-on devices such as sensors, and can control the world around it by adjusting lights, motors, and other actuators. In this class you will learn how and when to use the different types of sensors and how to connect them to the Arduino. Since the external world uses continuous or analog signals and the hardware is digital you will learn how these signals are converted back-and-forth and how this must be considered as you program your device. You'll also learn about the use of Arduino-specific shields and the shields software libraries to interface with the real world. Please note that this course does not include discussion forums.
The Raspberry Pi Platform and Python Programming for the Raspberry PiТекущая сессия: Mar 27–May 1.
О курсеThe Raspberry Pi is a small, affordable single-board computer that you will use to design and develop fun and practical IoT devices while learning programming and computer hardware. In addition, you will learn how to set up up the Raspberry Pi environment, get a Linux operating system running, and write and execute some basic Python code on the Raspberry Pi. You will also learn how to use Python-based IDE (integrated development environments) for the Raspberry Pi and how to trace and debug Python code on the device. Please note that this course does not include discussion forums.
Interfacing with the Raspberry PiТекущая сессия: Mar 27–May 1.
- 4 weeks of study 2-4 hours/week
О курсеThe Raspberry Pi uses a variety of input/output devices based on protocols such as HDMI, USB, and Ethernet to communicate with the outside world. In this class you will learn how to use these protocols with other external devices (sensors, motors, GPS, orientation, LCD screens etc.) to get your IoT device to interact with the real world. Most physical devices use analog signals; however computer hardware is digital so in this class you will learn how these signals are converted back-and-forth and how this must be considered as you program your device. The basic design of a sensor-actuator system will also be covered. You will also learn how to build more sophisticated hardware systems using Raspberry Pi expansion boards to create fun and exciting IoT devices. Please note that this course does not include discussion forums.
Programming for the Internet of Things ProjectТекущая сессия: Mar 27–May 1.
- 4 weeks of study, 2-3 hours/week
О дипломном проектеIn this Capstone course, you will design a microcontroller-based embedded system. As an option, you can also build and test a system. The focus of your project will be to design the system so that it can be built on a low-cost budget for a real-world application. To complete this project you'll need to use all the skills you've learned in the course (programming microcontrollers, system design, interfacing, etc.). The project will include some core requirements, but leave room for your creativity in how you approach the project. In the end, you will produce a unique final project, suitable for showcasing to future potential employers. Note that for the three required assignments you do NOT need to purchase software and hardware to complete this course. There is an optional fourth assignment for students who wish to build and demonstrate their system using an Arduino or Raspberry Pi. Please also note that this course does not include discussion forums.
Зарегистрируйтесь, чтобы воспользоваться 7-дневным бесплатным пробным периодом.
Unlimited access to all courses in the Specialization.
Просматривайте лекции, выполняйте оцениваемые задания, делитесь мнением на форумах обсуждений и многое другое.
Никаких штрафов — просто отмените пробное обучение до его окончания, если вас что-то не устраивает.
Certificate when you complete.
Добавьте в резюме или в профиль LinkedIn.