This course is for you if you are looking to dive deeper into Six Sigma or strengthen and expand your knowledge of the basic components of green belt level of Six Sigma and Lean. Six Sigma skills are widely sought by employers both nationally and internationally. These skills have been proven to help improve business processes and performance. This course will take you deeper into the principles and tools associated with the "Improve" and "Control" phases of the DMAIC structure of Six Sigma.
Этот курс входит в специализацию ''Специализация Квалификации "Зеленый пояс" по системе "Шесть сигма"'
Six Sigma Advanced Improve and Control Phases
от партнера
Специализация Квалификации "Зеленый пояс" по системе "Шесть сигма"Система университетов штата Джорджия
Об этом курсе
Недавно просмотрено: 15,297
Карьерные результаты учащихся
14%
получил значимые преимущества в карьере благодаря этому курсу
17%
стал больше зарабатывать или получил повышение
Карьерные результаты учащихся
14%
получил значимые преимущества в карьере благодаря этому курсу
17%
стал больше зарабатывать или получил повышение
Сертификат, ссылками на который можно делиться с другими людьми
Получите сертификат по завершении
100% онлайн
Начните сейчас и учитесь по собственному графику.
Курс 4 из 4 в программе
Гибкие сроки
Назначьте сроки сдачи в соответствии со своим графиком.
Промежуточный уровень
Прибл. 8 часа на выполнение
Предполагаемая нагрузка: 5 hours/week
Английский
Субтитры: Английский, Румынский
Программа курса: что вы изучите
2 ч. на завершение
Root Cause Analysis
In this module, Dr. Bill Bailey will cover root cause analysis, which includes the 7-step model, counter measure, and "single-minute exchange of die" (SMED). This module also begins with a Yellow Belt Refresher Area, since some learners may have entered this course without having taken the previous belt material. This refresher area does not serve as a "replacement" for taking the material. It is only a "patch" for those who already have some knowledge of six sigma, but find the yellow belt specialization to be too introductory for their current situation. If you find yourself struggling with the green belt material in this course, it is highly recommended that you travel through the yellow belt specialization before attempting the green belt content.
2 ч. на завершение
12 видео ((всего 51 мин.)), 5 материалов для самостоятельного изучения, 2 тестов
12 видео
Purpose of Lean5мин
Cause and Effect Diagrams1мин
5 Whys4мин
FMEA - pt15мин
FMEA - pt25мин
FMEA - pt36мин
Introduction1мин
7-Step Model4мин
More Tools for Root Cause4мин
Counter Measures4мин
Single-minute Exchange of Die (SMED)5мин
5 материала для самостоятельного изучения
Highly-Recommended Text10мин
Introduction - Recommended Reading10мин
7-Step Model - Recommended Reading10мин
Counter Measures - Recommended Reading10мин
SMED - Recommended Reading10мин
2 практического упражнения
Root Cause Analysis Practice Quiz20мин
Root Cause Analysis Graded Quiz20мин
2 ч. на завершение
Lean Tools
In this module, Dr. Bill Bailey will cover a more advance use of lean tools, including a look at the lean philosophy, lean goals, and lean systems. You will also be exposed to three important case studies. This module also begins with a Yellow Belt Refresher Area, since some learners may have entered this course without having taken the previous yellow belt material. This refresher area does not serve as a "replacement" for taking the yellow belt material. It is only a "patch" for those who already have some knowledge of six sigma, but find the yellow belt specialization to be too introductory for their current situation. If you find yourself struggling with the green belt material in this course, it is highly recommended that you travel through the yellow belt specialization before attempting the green belt content.
2 ч. на завершение
17 видео ((всего 79 мин.))
17 видео
Poka Yoke3мин
Removing Waste5мин
Kaizan4мин
Kan Ban8мин
5S4мин
Process Mapping - vid16мин
Process Mapping - vid23мин
Value Stream Mapping4мин
Total Productive Maintenance, Visual Management, & SMED4мин
Introduction1мин
Lean Philosophy5мин
Lean Goals4мин
Lean Tools & Systems5мин
Case Study 14мин
Case Study 23мин
Case Study 36мин
2 практического упражнения
Lean Tools Practice Quiz20мин
Lean Tools Graded Quiz20мин
1 ч. на завершение
Statistical Process Control (SPC) & Control Plan
In this module, Dr. David Cook will cover statistical process control (SPC) and control plan.
1 ч. на завершение
5 видео ((всего 23 мин.)), 2 материалов для самостоятельного изучения, 2 тестов
5 видео
Statistical Process Control - Part 23мин
Statistical Process Control - Part 32мин
Statistical Process Control - Part 45мин
Control Plan6мин
2 материала для самостоятельного изучения
Statistical Process Control - Recommended Reading10мин
Control Plan Recommended Reading10мин
2 практического упражнения
SPC and Control Plan Practice Quiz18мин
SPC and Control Plan Graded Quiz20мин
1 ч. на завершение
Lean Tools for Process Control
In this module, Dr. David Cook will cover lean tools for process control.
1 ч. на завершение
2 видео ((всего 7 мин.)), 1 материал для самостоятельного изучения, 2 тестов
1 материал для самостоятельного изучения
Lean Tools and Process Control - Recommended Reading10мин
2 практического упражнения
Lean Tools for Process Control Practice Quiz20мин
Lean Tools for Process Control Graded Quiz20мин
Рецензии
4.7
Лучшие отзывы о курсе SIX SIGMA ADVANCED IMPROVE AND CONTROL PHASES
от партнера RKDec 11, 2017
The specialization gives a very good idea about lean sigma . however, it would ave been It would have been interesting if a section about service quality applications was added in each of the courses.
от партнера LBFeb 16, 2020
Overall, courses 1-3 were great! I think the final course should have more monitoring from those who are accomplished in Six Sigma.
от партнера SSJan 17, 2020
very nice and better content, awesome trainers and over all a very good experience in learning DMAIC. Highly recommended.
от партнера ELApr 28, 2018
SImplified version of the Lean Six Sigma book yet contains a significant amount of information.
от партнера JXMay 11, 2019
Most of the contents are useful, but the requirement for the project is a bit too much.
от партнера SDJul 13, 2019
Amazing course. You learn a lot about quality control and other tips and tricks
от партнера DNSep 9, 2019
Very intense but well organised and taught. Easy to follow and learn.
от партнера MFeb 20, 2019
Very Very interesting course. Deserved to be taken
от партнера
Система университетов штата Джорджия
The University System of Georgia is composed of 28 higher education institutions including 4 research universities, 2 regional universities, 12 state universities, 13 state colleges and the Skidaway Institute of Oceanography. The Georgia Public Library System, encompassing 61 library systems throughout Georgia, is also part of the University System.
Специализация Квалификации "Зеленый пояс" по системе "Шесть сигма": общие сведения
This specialization is for you if you are looking to learn more about the more advanced components of Six Sigma and Lean. Six Sigma skills are widely sought by employers both nationally and internationally. These skills have been proven to help improve business processes, performance, and quality assurance.
In this specialization, you will learn proven principles and tools specific to six sigma and lean.
This is a sequential, linear designed specialization that covers a more advanced level of content (at the "green belt" level) of Six Sigma and Lean. Yellow Belt knowledge is needed before advancing to Green Belt (which is the second specialization offered here on Coursera by the USG). Green Belt knowledge is needed before moving to a Black Belt.
The proper sequence of this specialization is:
Course #1 - Six Sigma and the Organization (Advanced)
Course #2 - Six Sigma Advanced Define and Measure Phase
Course #3 - Six Sigma Advanced Analyze Phase
Course #4 - Six Sigma Advanced Improve and Control Phase
At the end of Course #4 (Six Sigma Advanced Improve and Control Phase), there is a peer-reviewed, capstone project. Successful completion of this project is necessary for full completion of this specialization.
It should be noted that completing either the Yellow Belt or Green Belt Specializations does not give the learner "professional accreditation" in Six Sigma, but should assist in better preparation for such professional accreditation testing.
Часто задаваемые вопросы
Когда я получу доступ к лекциям и заданиям?
Зарегистрировавшись на сертификацию, вы получите доступ ко всем видео, тестам и заданиям по программированию (если они предусмотрены). Задания по взаимной оценке сокурсниками можно сдавать и проверять только после начала сессии. Если вы проходите курс без оплаты, некоторые задания могут быть недоступны.
Что я получу, оформив подписку на специализацию?
Записавшись на курс, вы получите доступ ко всем курсам в специализации, а также возможность получить сертификат о его прохождении. После успешного прохождения курса на странице ваших достижений появится электронный сертификат. Оттуда его можно распечатать или прикрепить к профилю LinkedIn. Просто ознакомиться с содержанием курса можно бесплатно.
Какие правила возврата средств?
Можно ли получить финансовую помощь?
Остались вопросы? Посетите Центр поддержки учащихся.
