Вернуться к Robotics: Aerial Robotics

звезд

Оценки: 2,668

•

Рецензии: 683

How can we create agile micro aerial vehicles that are able to operate autonomously in cluttered indoor and outdoor environments? You will gain an introduction to the mechanics of flight and the design of quadrotor flying robots and will be able to develop dynamic models, derive controllers, and synthesize planners for operating in three dimensional environments. You will be exposed to the challenges of using noisy sensors for localization and maneuvering in complex, three-dimensional environments. Finally, you will gain insights through seeing real world examples of the possible applications and challenges for the rapidly-growing drone industry.
Mathematical prerequisites: Students taking this course are expected to have some familiarity with linear algebra, single variable calculus, and differential equations.
Programming prerequisites: Some experience programming with MATLAB or Octave is recommended (we will use MATLAB in this course.) MATLAB will require the use of a 64-bit computer....

IT

22 окт. 2017 г.

The course is very good.\n\nThe classes are well taught and show general concepts. It is necessary to do research on the internet, to solve the assignments. This is not a bad thing in my point of view

ST

8 июня 2018 г.

I think this is very good course of aerial robotics research. Being a student of robotics, I feel that some of stuffs in this course needs a good background in control and mechanical engineering.

Фильтр по:

автор: Shrivathsa M S

•25 мар. 2020 г.

The course itself was fine. I was disappointed with the assignments. The first two were really easy and required only a couple of equations to be coded in. The last assignment was extremely difficult. Most of the things required to solve the last assignment were not covered in the course and only after reading many posts on the forum could I finish it. The quizzes were annoying too because the options were very close and if you got it wrong, it wouldn't tell you the correct answers.

So, to summarize, my main gripe was with the assignments. They should be more related to the course material and they definitely shouldn't be as hard as the last one.

автор: Andrei G

•20 февр. 2016 г.

All in all the material, videos and assignments were very interesting and they made up an exciting course.

However, some of the slides lacked sufficient information on notions or did not make references to supplementary sources. The assignment material (mainly pdfs) sometimes had typos which made solving them a bit confusing and more time consuming without actually being very difficult. Also for both slides and assignments the notations were not always consistent and/or variables disappeared from equations without clear explanations.

I hope in the next offering of this course there will be improvements on these aspects.

автор: Richard D

•20 окт. 2016 г.

Not a beginner course. You need an engineering background to know how to interpret the equations enough to finish the coding assignments in Matlab. Some of the equations presented don't have enough explanation behind them for them to seem in context or to give any idea about how they can be applied.

I have a background in electrical engineering, and I studied control systems in undergrad, so I was able to get by. If you can't manage through this course, don't feel like you aren't smart enough to complete it; rather, you just don't have the proper pre-requisites.

автор: MILIND.V.BHAT

•31 июля 2016 г.

The course provides a good insight into the world of Aerial Robotics and the dynamics involved in controlling the quad-rotors. Were the course fails is it does not explain the basics , there is more focus on trial and error and the questions are not formulated correctly such that they are simple to understand. It could have been better if the Introductory course to the specialization had little mathematical involved or could have been explained in simpler terms or with examples instead of showing the equation in the video.

автор: Joshua G

•29 окт. 2020 г.

There is a lot of required content for completing this course missing. Tuning the PID controllers is essential information for the assignments and the course doesn't address this in any way, nor give a decent starting point.

The forums are full of information from students having problems and helping each other, which is great. It's just not great that the information wasn't available in the lectures or course material.

Otherwise, I enjoyed learning in this course and look forward to the remainder of the specialization.

автор: Afnan A

•9 февр. 2019 г.

I think there needs to be more association elaborated between the video lectures and the questions being asked during the lectures. It seems these questions are asked before the lecture itself tends to touch the point of it.

Secondly, it was a bit difficult to associate the assignment write-ups to the lectures. Obviously they were relevant but this should be more clear in text and video.

автор: kot

•2 мар. 2016 г.

The course is interesting and entertaining at times, though seems relatively undercooked. Typos in video lectures and assignment writeups are still frequent. The course content is a bit rushed, with some rather difficult aspects left almost unexplained. Definitely not for begginers, as some knowledge of physics, differential equations, calculus, matlab programming is highly recommended!

автор: Bogishetty D

•21 мая 2019 г.

The course material provided is very good, but there are lack of resources and support for further study or for revision. It says that it is an introductory course but you need to a know lot of things beforehand starting this course and the prerequisites are not stated clearly. If these issues are sorted then its an 5/5 course

автор: Jason D

•29 февр. 2016 г.

Some good material and I good introduction to aerial robotics. But, it doesn't cover all the theory needed to actually write flight control software for a quad copter. If you are really new to robotics you will need to spend at least 40-50 hours a week "discovering" enough of the details to pass the course.

автор: Masoud H

•21 апр. 2017 г.

Well I liked the course untile the last assignment. It says you need 3 hours for this assignment but I could finish it after two days (and I am good in programming). The last assignment is not really well designed specially the trajectory part. The rest of the course was good.

автор: Ruy I

•19 янв. 2017 г.

Very informative, but the coding elements can be somewhat difficult mainly because there's not many specific examples provided. It is still a very enlightening course. PS You definitely need to at the very least be very familiar with Differential Equations to take this.

автор: Abhijeet P

•16 нояб. 2019 г.

The supplementary videos really helped me a lot to understand concepts better. I wish I could see more of these in week 1 and week 2. As a newbie to Robotics and Mechanical concepts, It was difficult for me to follow through the material in week 1 and week 2.

автор: Anoop R

•1 авг. 2017 г.

Course needs to be longer, with more quizes and sub projects. The final project is a little harder and some lectures should have been devoted to explaining some more of the mathematics behind it. Also a larger mathematics refresher would have been useful.

автор: Saleem U B

•11 февр. 2016 г.

Its a really great project but one needs to have studied mechanical and really advanced level physics to do this project. But I really got help of the discussion forums to complete the assignments but am not yet clear about the theory of aerial robotics.

автор: Liu Y

•16 февр. 2016 г.

the course is ok, but the assignment require a lot of prior knowledge on automation control theory, which can be really difficult to be done.

I suggest that they should provide extra material for those students who have only computer science background.

автор: Jose M H

•30 июля 2017 г.

I learned a lot from this course. I wish there was more supplemental materials (week 4 was lacking and in need of additional material specially on the trajectory generation) and exercises to help gain a better understanding on the concepts.

автор: mohammad o

•23 июня 2017 г.

The course is good and has a lot of information and knowledge, but I hoped to be more practical because I think it is better to get more practicality and less theory so there will be more applying than only studying.

автор: M P A

•21 апр. 2021 г.

Theoretical classes were absolutely to the point, impressive, and easy to understand. But week 4's content was complex; better animations should be utilized. The programming exercise was extremely difficult.

автор: Lucas M G

•20 февр. 2017 г.

This is a good course, and you get an overview of a lot of interesting topics. However, as you advance further in the course, some of the math begins to lose consistency, while some of it just gets skipped.

автор: Hasan T

•2 апр. 2016 г.

Some topics were explained in a shallow manner. I suggest providing detailed lecture notes besides the videos for students trying to understand math and physics behind the concepts introduced in videos

автор: Syed Z M

•6 февр. 2016 г.

The course is awesome in terms of topics covered. But the pace is too fast. moreover the lectures are not comprehensive. It is needed to put more material or refer some notes or books that might help

автор: Mohsen Z

•31 мая 2017 г.

Provides a good over view but would it be more helpful if the instructor could make better connection between his speech and equations presented in slides. These two seem not to be well connected.

автор: Emeka E

•11 мар. 2016 г.

I think there is need to provide clearer instructions on how to get the programming assignments done. The course content is good, but doing the programming assignments needs to be more clarified.

автор: Damoun L

•19 янв. 2017 г.

I had problems with lots of small inconsistencies in notations...

I prefer courses which are mathematically more precise, and develop the material more systematically.

автор: Sanet G

•24 июня 2016 г.

The course covered very interesting topics, but it would have preferred more detailed explanation of PD controllers and especially how to choose the tuning constants.

- Google Data Analyst
- Управление проектами от Google
- UX-дизайн от Google
- ИТ-поддержка Google
- Наука о данных IBM
- Аналитик данных от IBM
- Анализ данных с помощью Excel и R от IBM
- Аналитик по кибербезопасности от IBM
- Маркетинг в социальных сетях от Facebook
- Разработчик комплексных облачных приложений IBM
- Представитель по развитию продаж от Salesforce
- Сбытовые операции Salesforce
- Soporte de Tecnologías de la Información de Google
- Certificado profesional de Suporte em TI do Google
- ИТ-автоматизация с помощью Python от Google
- DeepLearning.AI Tensorflow
- Popular Cybersecurity Certifications
- Popular SQL Certifications
- Popular IT Certifications
- See all certificates

- бесплатные курсы
- Изучите иностранный язык
- Python
- Java
- веб-дизайн
- SQL
- Cursos Gratis
- Microsoft Excel
- Управление проектами
- Безопасность в киберпространстве
- Людские ресурсы
- Data Science Free Courses
- говорить на английском
- Content Writing
- Веб-разработка: полный спектр технологий
- Искусственный интеллект
- Программирование на языке C
- Навыки общения
- Блокчейн
- Просмотреть все курсы

- Навыки для команд по науке о данных
- Принятие решений на основе данных
- Навыки в области программной инженерии
- Навыки межличностного общения для проектных групп
- Управленческие навыки
- Навыки в области маркетинга
- Навыки для отделов продаж
- Навыки менеджера по продукту
- Навыки в области финансов
- Android Development Projects
- TensorFlow and Keras Projects
- Python для всех
- Глубокое обучение
- Навыки Excel для бизнеса
- Основы бизнеса
- Машинное обучение
- AWS Fundamentals
- Data Engineering Foundations
- Data Analyst Skills
- Skills for UX Designers

- MasterTrack® Certificates
- Профессиональные сертификаты
- University Certificates
- MBA & Business Degrees
- Степени в области науки о данных
- Степени в области компьютерных наук
- Дипломные программы по анализу данных
- Степени в области общественного здравоохранения
- Social Sciences Degrees
- Дипломные программы в области управления
- Degrees from Top European Universities
- Дипломы магистра
- Степени бакалавра
- Degrees with a Performance Pathway
- Бакалаврские курсы
- What is a Bachelor's Degree?
- How Long Does a Master's Degree Take?
- Is an Online MBA Worth It?
- 7 Ways to Pay for Graduate School
- Просмотреть все степени