Chevron Left
Вернуться к Motors and Motor Control Circuits

Отзывы учащихся о курсе Motors and Motor Control Circuits от партнера Колорадский университет в Боулдере

4.5
Оценки: 60
Рецензии: 12

О курсе

This is our second course in our specialization on Embedding Sensor and Motors. To get the most out of this course, you should first take our first course entitled Sensors and Sensor Circuits. Our first course gives you a tutorial on how to use the hardware and software development kit we have chosen for the lab exercises. This second course assumes that you already know how to use the kit. After taking this course, you will be able to: ● Understand how to specify the proper AC or DC motor for a machine design. ● Integrate the motor to a machine, based on analysis of motor equations for voltage, current, torque and speed. ● Implement the motor and accompanying rotary sensor into a motor control circuit in both hardware and software. ● Add a motor and motor control circuit into a microprocessor based development kit. ● Create hardware and firmware to process motor feedback data to a microprocessor for further evaluation. You will need to buy the following components to do the two course projects based on the videos in this module. Note that if you have already purchased the PSOC 5LP PROTOTYPING KIT, you do not need to buy it again. These parts may be purchased off the Digikey web site, www. Digikey.com. Or, you may obtain the specs from the site, and purchase them elsewhere. These are the part numbers for the above table, the lab on Motor Voltage and Current Measurement. You can copy and paste them into the search engine on the Digikey web site. You need one of each except for the AA batteries (N107-ND), which you would need 3. 428-3390-ND P14355-ND FQU13N10LTU-ND N107-ND 1N5393-E3/54GICT-ND RNF14FTD1K00CT-ND P0.62W-1BK-ND These are the part numbers for the above table, so you can copy and paste them into the search engine on the Digikey web site. You will need one of each. 428-3390-ND 987-1188-ND...

Лучшие рецензии

MC

Mar 06, 2019

This course is a fantastic review or introduction to AC and DC motors. I highly recommend it to anyone in automation or robotic controls.

MD

Feb 08, 2019

it is one of best courses about motors\n\nthanks for instructors

Фильтр по:

1–12 из 12 отзывов о курсе Motors and Motor Control Circuits

автор: Manuel C

Mar 06, 2019

This course is a fantastic review or introduction to AC and DC motors. I highly recommend it to anyone in automation or robotic controls.

автор: Mohamed A D

Feb 08, 2019

it is one of best courses about motors

thanks for instructors

автор: Jahangir A

Apr 03, 2019

Excellent Course

автор: Ahmed S

Apr 18, 2019

This is a useful tricky course

автор: yatindra k g

Aug 26, 2019

it is a very good course .Good explanation too .

автор: Muhammad B M

Aug 29, 2019

It is one of best courses about motors.

автор: Saud K

Oct 08, 2019

A very good and detailed course on electric motors.

автор: Pablo C S

Sep 23, 2019

Muita informação útil adicionada e curiosidades, bem útil.

автор: Sunil K G

May 02, 2019

Excellent course on basics of Motors and Motor control

автор: YADUVEER S

Jan 12, 2019

if you are electrical engineer no need to do this

автор: Chris J

Jun 20, 2019

Questions go unanswered for months on the discussion forum.

автор: Ovidiu S

Dec 08, 2018

A lot o dumb recitation. Very disappointing.