Chevron Left
Вернуться к Equivalent Circuit Cell Model Simulation

Отзывы учащихся о курсе Equivalent Circuit Cell Model Simulation от партнера Колорадский университет в Боулдере

Оценки: 241
Рецензии: 56

О курсе

This course can also be taken for academic credit as ECEA 5731, part of CU Boulder’s Master of Science in Electrical Engineering degree. In this course, you will learn the purpose of each component in an equivalent-circuit model of a lithium-ion battery cell, how to determine their parameter values from lab-test data, and how to use them to simulate cell behaviors under different load profiles. By the end of the course, you will be able to: - State the purpose for each component in an equivalent-circuit model - Compute approximate parameter values for a circuit model using data from a simple lab test - Determine coulombic efficiency of a cell from lab-test data - Use provided Octave/MATLAB script to compute open-circuit-voltage relationship for a cell from lab-test data - Use provided Octave/MATLAB script to compute optimized values for dynamic parameters in model - Simulate an electric vehicle to yield estimates of range and to specify drivetrain components - Simulate battery packs to understand and predict behaviors when there is cell-to-cell variation in parameter values...

Лучшие рецензии

12 апр. 2020 г.

Superb course, well explained. The instructor made difficult concept look so easy. Honors content has some good insights into design of electric vehicles battery pack.

30 июня 2020 г.

Very interesting and well planned course theory as well as programming , recommended to learners in the field of battery storage and grid integration

Фильтр по:

26–50 из 56 отзывов о курсе Equivalent Circuit Cell Model Simulation

автор: Ummid I S

20 июля 2020 г.

Once again Great Learning Experience ! Thanks to Dr. Gregory Plett and his team !!

автор: Albert S

30 апр. 2019 г.

A fundamental course for any engineer interested in battery control algorithms.

автор: K N R

30 нояб. 2020 г.

It was a quite a learning experience, improved my new skill set

автор: Arkoprova M

13 июля 2020 г.

Very good course, the codes enhanced the experience even better

автор: Ertuğrul K

16 авг. 2020 г.

It was a great course, I recommend it to everybody!

автор: Pei Z

31 янв. 2021 г.

Thank you for the excellent course, Dr. Plett!

автор: Sophie T

8 дек. 2019 г.

Not easy but possible. An excellent course!

автор: Binsy J

2 июля 2020 г.

Course content is excellent .

автор: Bhosale K S

5 мая 2020 г.

Very informative course

автор: J S V S K

30 авг. 2020 г.

I learned programming.

автор: Burak

19 июля 2020 г.

Great explanation!

автор: Neeraj G

26 июня 2020 г.

Excellent course.

автор: Sanura N

31 окт. 2020 г.

Excellent course

автор: Preethivnahaarjun N

31 авг. 2020 г.

Excellent course

автор: Haseeb P

11 нояб. 2020 г.


автор: 2019BTEEL00034 M S S

17 февр. 2021 г.


автор: VIJAY J G

23 авг. 2020 г.


автор: Nikhil B

25 мая 2020 г.

Dr. Plett is a great professor! His examples were very insightful and easy to understand. I really enjoyed this course. The only thing that I wish had gone better was the student-mentor interaction. Everything was going well until the last week with the capstone assignment. I really enjoyed learning about the simulation and spent a lot of time trying to submit my assignment. Although my answers were correct, there is an issue with the grader and the submission process that made me waste a lot of time. If this could be fixed, it would be a much better experience.

автор: Cagatay C

5 июля 2020 г.

It could have been a lot better if the full octave codes were provided. Notebooks do not give efficient control of workspace. I downloaded the toolboxes from Dr. Plett's UC website but they are different than the content in notebooks which are tailored for the course. There is a gap between the two. I hope it will be clarified in the future.

автор: Ganeshprasad

24 июня 2020 г.

Most part of the course was very knowledgeable and interesting. Only there were few issues in updating the Capstone assignment to the latest version which was solved after multiple interactions with coursera support team

автор: Gaurang D J

26 мая 2020 г.

Great course content to get started in battery models, its charging and other simulations.

Continuous slide show system of teaching gets uninteresting over time, so that should be worked upon.

автор: Vikas S

29 мая 2020 г.

Professor designed and explained the course very well. it helped me a lot to understand the concept of Battery algorithms.

автор: YE Z

24 мая 2020 г.

Course is good, but Coursera website is really really really bad.

автор: Alexis F

9 февр. 2021 г.

Great course. Some horrible bugs in the labs.