Chevron Left
Вернуться к Введение в теоретическую механику

Отзывы учащихся о курсе Введение в теоретическую механику от партнера Технологический институт Джорджии

4.7
звезд
Оценки: 1,671
Рецензии: 367

О курсе

This course is an introduction to learning and applying the principles required to solve engineering mechanics problems. Concepts will be applied in this course from previous courses you have taken in basic math and physics. The course addresses the modeling and analysis of static equilibrium problems with an emphasis on real world engineering applications and problem solving. The copyright of all content and materials in this course are owned by either the Georgia Tech Research Corporation or Dr. Wayne Whiteman. By participating in the course or using the content or materials, whether in whole or in part, you agree that you may download and use any content and/or material in this course for your own personal, non-commercial use only in a manner consistent with a student of any academic course. Any other use of the content and materials, including use by other academic universities or entities, is prohibited without express written permission of the Georgia Tech Research Corporation. Interested parties may contact Dr. Wayne Whiteman directly for information regarding the procedure to obtain a non-exclusive license....

Лучшие рецензии

ZA

Nov 08, 2018

The interactive approach of Dr. Wanye Whiteman leads to clarify the concept of Engineering Mechanics. I am glad to enroll this course, I will enroll further courses in future.\n\nThank you so much

SW

Apr 17, 2019

everyone should do this course because experimental solutions are also explained and\n\nwe get a practical approach for each question\n\nvery well prepared course with simple and lucid language.

Фильтр по:

301–325 из 362 отзывов о курсе Введение в теоретическую механику

автор: Thomas P

Sep 26, 2015

Wayne comes across as very enthusiastic and likable. The course material is interesting.

It does feel like the course if artificially stretched out a bit too long, though. The material and exercises seem to get repetitive after week 3, when the pattern has been established to sum up all forces, and then to sum up all cross-products.

Nevertheless, this is an introductory course, so too much depth can not be expected. As an introduction, it was a great experience.

автор: Avril K

Dec 16, 2016

This is a reasonable course, I definitely learned some stuff about mechanics. Things were generally explained well, though there were some things that could have been explained better. The quizzes were very simplistic (the type of multiple-choice questions where you often don't have to actually be able to do the calculations to figure out the answer, you can just look at the options and rule out all but the right one).

автор: William L

Sep 11, 2015

Besides those interested engineering, those interested in learning how stuff works will love this course. I have been studying calculus and was bored with math problems that do not have real world application. This course provided those applications in spades, although at a beginning level in mechanical engineering. If you love math and love solving problems, this course is a great place to do it.

автор: M S H

Apr 05, 2017

Highly useful lectures.The classes can be more effective by active participation of more students simultaneously. A brief insight into derivation of some basic concepts and introduction to fundamental difference between different kinds of members used in engineering applications can be added.

Thanks for the lectures !

Practical demonstration of the problems provides a better clarity.

автор: Kyle R

Sep 21, 2015

Great introduction to engineering processes. I was hoping, however, to gain a bit more insight on general details of structures and mechanics, such as what types of materials or designs should be used in certain situations and why. This course covered only mathematics, which while essential, are not the only aspect of engineering in real life applications.

автор: gustavo z

Oct 14, 2015

I finished the course and I think the course is a great first view of what engineering mechanics can offer to the students at the university. I am a mechanical engineer newly graduated at UFRGS and the course was a great experience to recall some of the content learned at the university.

автор: Brock J

Dec 05, 2017

Great introductory course into statics. There are a few errors sprinkled in the lessons which could be cleaned up to make it better. Solutions for the practice problem homework would be much appreciated. Thanks for putting this together.

автор: Iago A D

Nov 15, 2015

Great course, I like short videos where concepts are well explained and the quizzes are not tiresome at all but I consider than the pdf of the power point documents could be better, the complete solution does not appear in most of them

автор: Omar M

Sep 09, 2015

Ideal for Highschool students/graduates who want to pursue further higher educational engineering subjects. A little bit challenging, yet entertaining, and worthy of participating in. Good luck for all!!

автор: Vinayak S

Aug 30, 2015

I liked everything about this course except the unavailability of answers to the quiz questions. I think that once when someone passes the test, he/she should be able to view the answers.

автор: Dhruv G

Nov 04, 2017

Nice Course, everything was taught practically and the mentor is very conveying. But there is much higher level of this in Indian Syllabus in first year.

автор: Benjamin S

Nov 02, 2015

Good overview of engineering statics. However, I wish the homework and/or practice problems were built into the coursera platform like the quizzes.

автор: abdul a

May 27, 2016

It is a good online courses. I like the way Mr. Whitney present to us, he is using a tools to show us the phenomenon. Overall I like this course!

автор: Manogna R

Sep 30, 2016

very good learnt a lot but , a small suggestion is that please work out even more problems it helps us strengthen concepts . Thank you

автор: Carlos V

Mar 04, 2018

great course to introduction to classical mechanics, statics. The online reference book is one of the best i read in this subject

автор: Edgar J P

Oct 28, 2016

It is a good course, however it is less demanding that the one I had in the second year of my engineering education in the 1950s.

автор: Kareem A

Mar 18, 2016

it was a great thing to refresh my knowledge and remember a lot of ways i had forget, thanks Dr.Wayne a lot, hope you the best

автор: Ellen K

Aug 11, 2017

Good overview of mechanical mathematics but I felt that some of the information could have been explained in a simpler way.

автор: Erik d Z

Sep 02, 2015

Very good course, even better if the homework exercises would be provided with the possibility to check your own answers.

автор: mohamed s

May 22, 2017

great effort i understand a lot of conceptual matters that i didn't know before it's a really mental satisfaction

автор: Fares E S Q

Aug 23, 2017

This course really helped me understand the concepts of Statics and improved my understanding of it,

автор: Moulasaheb M

Sep 30, 2019

The course is good but the number of trails is really less and time of each attempt is really bad

автор: Jeetu B

Aug 26, 2019

i learnt beautiful aspects of the subject and the way of teaching was awesome to a next level.

автор: Jack D

Sep 11, 2015

Hard work but very well explained, lots of exercises and good content from a great university.

автор: Joseph S

Feb 08, 2016

Feedback: Great course! Only request is that the homework solutions be provided. Thanks.