Chevron Left
Вернуться к Введение в теоретическую механику

Отзывы учащихся о курсе Введение в теоретическую механику от партнера Технологический институт Джорджии

Оценки: 4,333
Рецензии: 903

О курсе

This course is an introduction to learning and applying the principles required to solve engineering mechanics problems. Concepts will be applied in this course from previous courses you have taken in basic math and physics. The course addresses the modeling and analysis of static equilibrium problems with an emphasis on real world engineering applications and problem solving. The copyright of all content and materials in this course are owned by either the Georgia Tech Research Corporation or Dr. Wayne Whiteman. By participating in the course or using the content or materials, whether in whole or in part, you agree that you may download and use any content and/or material in this course for your own personal, non-commercial use only in a manner consistent with a student of any academic course. Any other use of the content and materials, including use by other academic universities or entities, is prohibited without express written permission of the Georgia Tech Research Corporation. Interested parties may contact Dr. Wayne Whiteman directly for information regarding the procedure to obtain a non-exclusive license....

Лучшие рецензии


27 июля 2020 г.

It has been a fantastic journey of five weeks. The teaching style is excellent. I Will suggest every graduate student take this course to make a good understanding. Overall it is an excellent course.


15 июля 2020 г.

THE COURSE WAS VERY INTRESTING AND LIFETIME USEFULL STUFF BEING TOUGHT. TYANKS TO Dr. WHITEMAN he is really good explainer had a great experience and I'm sure gonna join more courses by Dr. WHITEMAN.

Фильтр по:

876–899 из 899 отзывов о курсе Введение в теоретическую механику

автор: Charles W

20 июня 2020 г.

I don't really feel like the concepts were explained very thoroughly. Presentations go over how, but not why. Also, past a certain number of math errors pointed out by correction overlays, a video could really benefit from a second take or some dubbing. That said, the textbook linked is good (hint: check the author's website for the current version, which has most of the typos and errors fixed since the 2013 edition used by this course). In the end, I learned the information, so the course did what it needed to.

автор: junfung i

21 мая 2020 г.

I'm not sure if there are people out there who have done this course that is studying A level maths.But I learned a lot of the material covered in this course in pure maths so this course was not entirely very new. Maybe the contextualization of pure concepts into the engineering world was useful.

автор: Aboud K

3 апр. 2021 г.

it was a good experience and i learned new knowledge i liked the teaching but i wished there were more pop up questions to search for in the lessons, searching for more ideas is a great way to interact with the lessons.

автор: Raphael A V M

9 мая 2017 г.

Good introductory course, but you can only attempt to answer the quiz once every 7 days, then the slides that are given do not include what the lecturer wrote so you will always have to go back to the video to find it.

автор: Md N R N

8 июня 2020 г.

the professor is awesome.It will better if he solve some hard problem in video lectures

автор: Yunus B

15 окт. 2020 г.

Questions were the problem anda sometimes videos weren't enough

автор: Omar a

30 мар. 2021 г.

There are no solutions for practices questions.

автор: Mohit B

16 мая 2020 г.

you should reduce the time for re-attempts.

автор: AMULYA R

1 июня 2020 г.

Best way to boost your knowledge or skill

автор: Yalamanchili A V S

8 июня 2020 г.

Good course for the Beginner`s

автор: shiva r

13 апр. 2017 г.


it was interesting.

автор: HAFIJUR R

16 июня 2020 г.

I need certificate

автор: Emilio Y H

20 мар. 2019 г.

too basic!!!

автор: Ahmed M A

2 сент. 2015 г.

fair enough

автор: Alex M

7 апр. 2020 г.

It's in American and somehow the answer to the 2D question went into the Kth dimension and I thought I could deal with the units and lack of angles but how the hell can you get a third dimension answer to a 2D question I mean Jesus Christ what the hell America

автор: KHAJA A

18 мая 2020 г.

Lectures , material need to be improved and must check the quiz answers before uploading .

автор: Tarek A

9 мар. 2021 г.

pace is way too fast. not suitable for an introductory or a beginning course

автор: Isaac R

19 дек. 2020 г.

The course is in intermediate terms but for my age and my time, it is impossible to continue with the course. I could not and I realized that the course almost everything is based on equation formulas and I did not understand anything at all. I thought that as it was an "Introduction" everything was going to do differently. The funny thing is that now I can't unsubscribe and that zero will stay on my record.

автор: zachariah m

31 мая 2020 г.

Almost every module was so incoherent I had to go look up multiple Youtube videos with partial information to grasp the concept. Fucking garbage classes with garbage teachers.

автор: Peter K

23 мар. 2022 г.

Great experience and learned the basics to engineering mechanics really vell. Thank you and keep up the great work!!!

автор: BOGA L

3 июня 2020 г.

Because you didn't provide a certificate even I completed my course 😑

автор: mahesh

24 июня 2020 г.

worst app i ever used .i could not do my id verification

автор: sai k v

5 июня 2020 г.

others name is given on the certificate

автор: muhamad j

23 окт. 2017 г.

it's good for the matery