Справочник
Искать:
Видео
Курс: 3-Axis Machining with Autodesk Fusion 360. Чтобы вернуться, нажмите здесь.
- Course overview
- Get the software
- Week 1 overview
- Inserting and locating a vise
- Modeling a body for stock
- Setting up a CAM program and tool library
- Identify 2D and 3D pockets
- Creating a closed 2D pocket clearing operation
- Creating a closed 3D adaptive clearing toolpath
- Creating a closed pocket clearing toolpath
- Identifying open and closed pocket geometry
- Applying 3D clearing toolpaths to complex geometry
- Applying adaptive clearing toolpaths to open pockets
- Practice exercise 1 video instructions
- Practice exercise 1 solution
- Practice exercise 2 video instructions
- Practice exercise 2 solution
- Practice exercise 3 video instructions
- Practice exercise 3 solution
- Week 2 overview
- Comparing a traditional vs. adaptive tool motion
- Creating a 2D adaptive clearing toolpath
- Creating a 3D adaptive clearing toolpath
- Understanding rest machining
- Rest machining with a 3D adaptive toolpath
- 3D pocket rest machining
- 3D pocket vs adaptive rest machining
- Practice exercise 1 video instructions
- Practice exercise 1 solution
- Practice exercise 2 video instructions
- Practice exercise 2 solution
- Practice exercise 3 video instructions
- Practice exercise 3 solution
- Week 3 overview
- Identify thin and small features
- Creating multiple step roughing passes
- Roughing and finishing a closed pocket
- Understanding and using spring passes
- Using spring pass on a small lip
- Using a bore toolpath with a spring pass
- Using 3D contour and ramp toolpaths
- Finding strengths and weaknesses in circular finishing toolpaths
- Identifying 3D step-over for a specific tool
- Identifying complex geometry that needs finishing
- Creating a pencil toolpath
- Creating a scallop toolpath
- Reordering multiple finishing toolpaths
- Practice exercise 1 video instructions
- Practice exercise 1 solution
- Practice exercise 2 video instructions
- Practice exercise 2 solution
- Practice exercise 3 video instructions
- Practice exercise 3 solution
- Week 4 overview
- Completing a process plan for milling
- Reviewing a tool library
- Create or edit a milling setup
- Face and counterbore the mounting boss
- Creating a circular pattern of a toolpath
- Creating Chamfer Toolpaths
- Drilling and tapping
- Export G code for the entire part
- Create a setup sheet
- Practice exercise 1 video instructions
- Practice exercise 1 solution
- Practice exercise 2 video instructions
- Practice exercise 2 solution
- Practice exercise 3 video instructions
- Practice exercise 3 solution